Product Name : Polypropylene Monofilament
Item # : 92243-683
Model :
Last update : 2009.01.14
Item # : 92243-683
Model :
Last update : 2009.01.14
Product details
Improving the surface quality, like roof of building and wall and floor, becomes a crucial task to the construction field. So on the basis of successfully developing polypropylene fiber-mesh for concrete and polyester fiber for bitumen for bitumen and in view of some technical problems existing in constructing field, our company sums up experiences and develops cracking-resistance reinforced fiber for cement paint (using in plastering). This fiber can improve quality of building's wall and floor, and supply a new technical measure to reduce the surface crack, so it has a good economic ＆#118alue.
Technical Data
|
Raw Material |
Polypropylene |
Crack Elongation |
15-20% |
|
Fiber Type |
monofilament |
Density |
0.91g/cm2 |
|
Fiber Dia. |
0.02±0.005nn |
Melting Point |
160-170℃ |
|
Tensile Strength |
7.67cN/dtex |
Acid & Alkali Resistance |
Strong |
Reinforced Functions to Concrete Mortar
★ Prevent mortar split and crackle expansion
★ Resist to shrink & crack
★ Increase seepage resistance
★ Increase friction resistance
★ Increase impact resistance and peeling resistance
★ Increase freezing & thawing resistance
★ Replace steel net (using in plastering)
The Feature of Polypropylene Monofilament
★ No agglomeration and easily spread around in mortar or concrete. Guarantee the property of crack resistance effectively。
★ Has fine economic property. The equivalent dia. of polypropylene monofilament is only φ 0.02mm, so the ratio of dia. And surface is high and on the basis of crack resistance, it can reduce the amount (o.6kg/m 3 ) and cut down the cost effectively.
★ Apply conveniently. No need to change the proportion of mortar, and just put the fibers into the mortar mixture and stir for a moment after adding water.
★ Be better to plaster. Because a great number of thin fibers spread into mortar evenly, so the plastering is much easier and this can improve the binding strength between surface and base.
★ The fiber has stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.
Suitable Engineering for Polypropylene Monofilament
★ Be suitable for the water–proof layer, floor, inner &outer wall of industrial and civil construction。
★ Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
★ Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
★ Be suitable for any mortar projects and fine aggregate concrete projects.
Applying Instruction
★ Compound Amount. To resist the common cracks on surfaces, 0.6kg/m3 fibers to cement paint are enough, and for reinforced application 0.9-.8kg/m3 are enough.
★ Stirring requirement. The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water (Do not stir without water!) and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.
★ Package. There are two specifications: 0.6kg per bag and 0.9kg per bag。
| Clicks:1069
Address: GanZhou,JiangXi,China | Email:cherrysong@zqfiber.com | Tel:+ 86 797-8119369 | Fax:+ 86 797-8215023