Huawei MA5800 X2 NG OLT H901BPSB subrack equipped with 2xH901MPSC, 1xH901PISB
Comes with 1PCS power cable, accessory package, cable management rack.
Chassis supports 2 service slots, MAX 4096 ONTs
Supports GPON, 10G PON, smoothly evolve to 40G/100G PON
Supports 4*GE/10GE upstream ports embedded in Main Control Board MPSC
Supports 16 port GPON interface card GPHF, GPSF
Supports 8 port 10GPON interface card XGHD, TWED
Support 262143 MAC address, 65536 ARP table
Supports over 8 times MAC address and ARP table more than MA5600T
Supports 1:64 eOTDR
Supports DOCSIS 3.1 standard
Huawei MA5800 X2 is a next generation, 40G capacity Optical line Terminal (OLT), has 2 service slots, each service slot has 200G throughput capacity, smoothly evolve to 40G/100G PON. Support up to 8 times MAC address and ARP table than MA5608T, makes service configuration and expansion more easily.
16 ports GPON service board GPHF, 8 ports 10G PON service board XGHD is recommended service board for MA5800 X2
| Product Specifications |
| Switching capacity of the system |
480 Gbit/s |
| Maximum bandwidth per slot |
H901MPSC: 80 Gbit/s
|
| Maximum number of MAC address |
262144 |
| Maximum number of ARP/routing entries |
65536 |
| Maximum number of concurrent 4K video users |
2000 |
| GPON ports |
32 |
| XG-PON ports |
32
|
| XGS-GPON ports |
16
|
| GE/FE ports |
96 |
| 10GE ports |
16 |
| Cabinet supported |
N63E-22 |
| Board Supported |
Control Board
|
| H901MPSC |
It provides 4 GE/10GE upstream transmission ports and supports load sharing. By default, MA5800 connects to upstream network through the control board |
| Upstream interface board |
| H901NXED |
Enhanced 8-port 10GE upastream interface board, supporting 10GE/GE Ethernet upstream transmission. NXED is used when upstream ports currently provided in MA5800 are not enough. |
| Service board |
| H901GPHF |
Provides 16 GPON ports for access services |
| H901GPSF |
Provides 16 GPON ports for home access services |
| H901XGHD |
Provides 8 asymmetric 10G GPON ports for access services. |
| H901TWED |
Provides 8 symmetric 10G GPON ports for access services. |
| H901EDSH |
32-channel E1 upstream board, supporting native TDM mode. |
| H901OGHK |
48-port aggregated GE/FE optical interface board, supporting up to 48 channels of GE/FE |
| H901OXHD |
8-port aggregated 10GE optical interface board, supporting GE/10GE Ethernet aggregation. |
| Power board |
| H901PISA |
Provides -48V DC input |
| H901PISB |
Provides one AC power input and supports battery for power backup. |
| Fan Monitoring board |
| H901FMSA |
Supplier power to fans; controls and moniotes the fans |
Dimensions
(W x D x H) (mm) |
2 U high and 19 inch wide442 mm x 268.7 mm x 88.1 mm
Including IEC mounting brackets: 482.6 mm x 268.7 mm x 88.1 mm
Including ETSI mounting brackets: 535 mm x 268.7 mm x 88.1 mm
|
| Maximum weight(including mounting brackets) |
9.4 kg |
| Maximum input current |
8A
|
| Power supply |
Working voltage range:100 V to 240 V
Rated voltage:110 V/220 V
|
| Ambient temperature |
-40°C to +65°C The MA5800 can start up at a lowest
The MA5800 can start up at a lowest temperature of -25°C and run at -40°C.
Note:The 65°C temperature refers to the highest temperature measured at the air intake vent of service subrack. |
| Ambient humidity |
5% RH to 95% RH |
